Linz 2016

 

  1. Optimal intra-station regimes of hydropower plants with asymmetric energetic characteristics - Aleksandar Petkovic
  2. Flow rate evaluation in parallel pump arrangements: Two case studies - J. Lanzersdorfer, M. Schmidt, J. Pichler
  3. HydroCord Condition Monitoring System - Erik J. Wiborg, Hakon H. Francke, Torbjorn Nielsen
  4. Experience of Vibration and Noise Measurements of Small Hydro Power Plants - Arun Kumar, B K Gandhi, Pradeep Chandra
  5. Dynamic Efficiency Measurements on Hydraulic Turbomachinery Model Testing: Examples of Implementation and Validation - Vlad Hasmatuchi, Alin Bosioc, Sébastien Luisier, Cécile Münch-Alligné
  6. Increasing hydro-equipment value with field measurements - P. Weibel, J. Contreras, S. Lais, E. Parkinson
  7. Flow Comparison Test at GM Shrum Powerplant - John W. Taylor, David D. Lemon, Dave Billenness
  8. Open channel discharge measurement using the acoustic transit time method – a case study - A. Abgottspon, T. Staubli, N. Gloor
  9. Turbine efficiency measured by thermodynamic method against using ultrasonic flowmeter - Petr Sevcik
  10. Application of thermodynamic efficiency measurement using temperature tensors installed into the water passage system - Gregor Alic, Damir Dolenc
  11. A new Measurement and Data Acquisition System for Field Acceptance Tests using the Thermodynamic Method - Christian Rakusch, Florian Senn, Mark Guggenberger, Helmut Jaberg
  12. Winter-Kennedy method in hydraulic discharge measurement: Problems and Challenges - Binaya Baidar, Jonathan Nicolle, Chirag Trivedi, Michel J. Cervantes
  13. Case study of bulb turbine efficiency testing - Emmanuel Côté
  14. Discarge measurement through multiple gates of low head power plants under unfavorable conditions - Bhupendra K. Gandhi, A. Kumar, Rahul K. Srivastava
  15. Simulation of hydropower flow measurement accuracy as a function of sensor density and placement - Mark Christian, Brennan Smith
  16. Investigation of the pressure-time method using design of experiments - Georgiana Dunca, Joel Sundström, Helene Dahl, Michel J. Cervantes
  17. Intercomparison of pressure-time method and current metering in a typical mid-head HPP - Petr SEVCIK, Robert BERNÝ, Grégory ROLANDEZ
  18. Geometric calibration experiences of ultrasonic flowmeters installed in hydropower stations in China - Heming Hu, Chi Wang, Haiyang Li, Feng Gao
  19. Comparison of different outlier filtering methods with applications to ultrasonic flow measurements - Peter Gruber
  20. Transient wall shear stress measurements at a high Reynolds number - L.R. Joel Sundström, Helene Dahl, Magni Fjørtoft Svarstad, Torbjørn K. Nielsen, Ole G. Dahlhaug, Michel J. Cervantes
  21. The blockage effect for intake measurement, a CFD approach for correcting the discharge - Gilles Proulx, Bertrand Reeb
  22. An experience in thermodynamic test of low head turbine in thailand the case of Mae Ngat hydro power plant - Matha Tantaworranart
  23. Statistical analysis on experimental calibration data for flowmeters in pressure pipes - Lazzarin A., Orsi E., Sanfilippo U.
  24. Volumetric gauging method vs Gibson method - comparative analysis of the measurement results of discharge through pomp-turbine in both operation modes - Adam Adamkowski, Waldemar Janicki, Zbigniew Krzemianowski, Mariusz Lewandowski